基于arm和dsp的嵌入式實時監控系統研究

1、華中科技大學碩士學位論文基于ARM和DSP的嵌入式實時監控系統研究姓名：廖青松申請學位級別：碩士專業：軟件工程指導教師：程時杰20060427ABSTRACT With the rapid development of technologies of computer, Internet and communications, embedded systems have been applied more and more widely

2、. Being a special processor core designed for embedded systems, the architecture of ARM has many merits: high performance、low battery consumption and easy to expanse, etc, which make it become one of the most widely used

3、 processor cores in the region of embedded systems . With the emergence of DSPs, which make for more flexible means of signal processing.Moreover, due to the continuous increase of DSPs performance, they can also deal wi

4、th the significant increase in bandwidth.Digital signal processing research priorities from the initial application in the non-real-time to high-speed real-time applications. In all kinds of embedded operating systems, W

5、indows CE with its advantages of clear structure, good interface support, which make its applications increasingly widespread in regions of embedded systems, such as monitoring system and hand-in devices and so on.. The

6、thesis summarizes features, applications and development status of embedded systems. Then analyses and discusses the DSPs and ARMs processors respectively, which are dominant in applications of embedded systems. As an U

7、PFC (Unified Power Flow Controller) physics simulation system is being constructed, a multi-processors based mornitoring system for the UPFC simulator is designed. The monitoring system uses the DSP, A/D converters, exte

8、rnal interface circuits and related peripheral hardware to achieve data collection system functions, and using an ARM microprocessor and incorporates Windows CE operating system to achieve the main control and communicat